Fitment Information:
This brake kit fits 2022 - 2025 Subaru WRX models.
Features:
Upgrade your Subaru WRX with the STM front drag brake kit! Say goodbye to the heavy stock rotors and calipers. This kit clears space for 15" wheels and slicks, perfect for drag racing, and shaves off up to 51 pounds. Less rotating mass means more power! The scalloped rotor, 2.7 pounds lighter than the standard one, is great for cars that spend more time on the drag strip than on the street. Note, it's not for street use.
- Works with or without the factory dust shield.
- Specifically designed for drag racing.
- Not suitable for continuous on - off braking like in road - racing or autocross.
- Clears most 15" wheels.
- Save 51.10 pounds with the Scalloped Kit.
What's Included:
- (2) STM Rotor Hats (STM - 00 - SUBI - FBH)
- (2) STM Caliper Brackets (STM - BKB - VBF)
- (1) STM Brake Lines (STM - 02PLUS - WRX - FRTCL)
- (2) Wilwood Front Rotors (Scalloped 160 - 8135)
- (2) Wilwood Front Calipers (WIL - 120 - 6816)
- (2) Wilwood Street Brake Pads (150 - 8850K)
- (2) Wilwood Hat Bolts (WIL - 230 - 0150)
- (4) M10x30 Bolts (FAS - 1139619)
- (4) M10 Washers (FAS - 1140384)
- (4) M12x35 Bolts (FAS - 1139655)
- (4) M12 Washers (FAS - 1140385)
Using this STM front drag brake kit for your 2022 - 2025 Subaru WRX is straightforward. First, make sure to remove the heavy stock rotors and calipers. Then, install the components included in the kit one by one according to the instructions. When installing, you can choose to keep or remove the factory dust shield as it fits either way. This brake kit is mainly for drag racing, so don't use it for continuous on - off braking in road - racing or autocross. Also, remember that the scalloped rotors are for the drag strip, not for normal street driving. For maintenance, regularly check the brake pads for wear. If they are getting thin, replace them with new ones. Check the brake lines for any signs of leakage or damage. Keep all the bolts tightened to ensure safe operation.
