EBC Yellowstuff Rear Brake Pads 2008-2010 Subaru WRX / 2005-2010 Outback / 2005-2012 Legacy / 2009-2012 Forester All Models

Part #: DP41584R. These EBC Yellowstuff rear brake pads are a top - notch choice for your vehicle. The high - friction formula boosts the braking effect by 30 - 40%. With zero brake fade, they're ideal for high - speed driving. You can use them for repeated heavy braking without any 'Fall - Off'. They cause very little damage to discs and rotors. They're great for short track events and racing. The medium - hardness material gives a great pedal feel. If you just need stopping power, this is the right choice. They're ECE R 90 type approved for most cars. The red 'brake in' surface coating ensures instant safe braking after installation. The EBC yellow 1793 compound is excellent all around. It has high friction even when cold, no warm - up needed for street use. When heated up, the brakes perform even better, and they can handle truck weights without heat fade. They've passed ECE Brake safety tests, working at least as well as stock pads from cold. On Japanese cars with lower - friction FF rated pads, they offer a full - grade higher stopping power. On German cars with GG pads, they're one of the few aftermarket pads that can match or beat the good German OE spec pads. They're high - efficiency performance and race brakes for both track and street use. They bed - in quickly, making them perfect for upgrading your street vehicle's brakes.

Using these EBC Yellowstuff rear brake pads is easy. Just install them following the standard procedures for your vehicle's brake system. After installation, the red 'brake in' surface coating will provide instant safe braking. When driving, you'll notice a significant improvement in stopping power, especially during high - speed or heavy - braking situations. As for maintenance, keep an eye on the wear of the pads. Regularly check the brake system for any signs of damage or abnormal noise. If you use them for track events, let the brakes cool down properly after each session to avoid overheating. Also, make sure to follow the general vehicle maintenance schedule recommended by your car manufacturer. These pads are durable, but proper care will ensure they last longer and perform at their best.