Product Detail
This IAG oil pan hardware and seal kit is a perfect fit for multiple Subaru models. It's designed as a full - replacement solution for hardware, o - rings, and gaskets that come with new IAG EJ Oil Pans. Fitment includes 2002 - 2014 Subaru WRX, 2004 - 2021 Subaru STI, 2005 - 2012 Subaru Legacy GT, and 2004 - 2013 Subaru Forester XT. The kit features a custom - molded oil pan seal, oil pickup spacers, drain plug, drain plug washer, associated o - rings, hardware, and sensor port plug. What's in the box? You'll get a custom molded Viton oil pan gasket, an oil drain plug, a sensor port plug, an oil pan drain plug washer, 2 dipstick o - rings, 4 - 008 o - rings, 2 - 117 o - rings, a CNC oil pickup spacer, 2 oil pickup spacers, 2 M6x25mm socket head screws, 10 M6x20mm socket head cap screws, 2 M6x10mm socket head cap screws, 6 M6x30mm socket head cap screws, and 4 M6 flat washers.
Using this IAG oil pan hardware and seal kit is easy. First, make sure your car's engine is cool. Remove the old hardware, o - rings, and gaskets from the oil pan. Then, install the new parts from the kit one by one following the order of the old parts. Pay special attention when installing the custom - molded oil pan seal to ensure a proper fit. As for the screws, use the right size and tighten them carefully to avoid any leaks. When it comes to maintenance, check the oil pan regularly for any signs of oil leakage. If you notice any, tighten the screws again or replace the parts as needed. Also, change the oil at the recommended intervals to keep your engine in good shape. Remember to store the unused parts in a dry place for future use.
