Noble S209 Style Fender Vents
Fitment Info
2015 - 2021 Subaru WRX
2015 - 2021 Subaru STI
Key Features
Get the authentic S209 look with these top - notch ABS fender vents. They're of OE quality and install easily using 3M and clips. They pair perfectly with market fender shrouds.
There are two versions, differing only in the mounting template. The installation method can cover slightly rough cuts, similar to aftermarket S209 rear bumper cooling vents.
NOTE: Can be used in various applications with a flat mounting surface.
Installation
Use the template to mark the vent's placement. You'll need painter's tape, a marker, and a saw to cut the sheet metal. Paint the metal after cutting to prevent rust.
Clean and prep the area before installing the inner part of the vent. Then click on the outer portion. Remember, the ideal bonding temperature is 75 - 85 degrees. It takes 24 hours for a good bond and 72 hours for a full bond. Do the installation in mid - to - low humidity.
Warranty
1 - year warranty against manufacturer defects
These Noble S209 style fender vents are for 2015 - 2021 Subaru WRX and STI models. They're made of high - quality ABS and offer an OE look. To install, first use the template to decide where to place the vent on your fender. Mark the area with painter's tape and a marker, then use a saw to cut the sheet metal. After cutting, paint the metal to avoid rust. Clean and prepare the area well before putting in the inner part of the vent. The outer part simply clicks on. Make sure the temperature is between 75 - 85 degrees for bonding. It'll take 24 hours for a good bond and 72 hours for a complete bond. Try to do the installation when the humidity is medium to low. They also come with a 1 - year warranty against manufacturer defects. And if you have a flat mounting surface, you can use these vents in other applications too.
