This Noble LX shift trim cover is a perfect fit for 2022 - 2025 Subaru WRX models with manual transmission. Crafted from dry carbon fiber, it features a sleek gloss finish. The thin, lightweight yet durable carbon fiber hugs your trim like a glove, instantly upgrading your vehicle's look. Installation is a breeze with the stick - on design. For installation, first clean the application area, free it from dust, dirt, wax, or fresh ceramic coating. Do the installation in 75 - 95 degree weather. Test fit the product, clean the 3M contact surface with alcohol. Remove the 3M backing, realign on the shift trim, and firmly press down. Allow 24 hours for a good bond and 72 hours for a complete bond. It comes with a 1 - year warranty against manufacturer defects. Be aware of California Prop 65 Warning as vehicle operation exposes you to harmful chemicals.
Hey there! Using this Noble LX shift trim cover is easy. First, make sure your car is a 2022 - 2025 Subaru WRX with a manual transmission. When you're ready to install, find a spot where the temperature is between 75 and 95 degrees. Clean the area where you'll put the cover really well, getting rid of any dust, dirt, wax, or new ceramic coating. Try fitting the cover on first to see where the 3M tape will touch the car. Then, clean that area with alcohol. Next, take off the protective backing from the 3M tape. Put the cover back on the shift trim and press down hard while pulling off the backing. Once the tape is all exposed, press the whole cover down firmly. Let it sit for 24 hours for a good bond and 72 hours for a full bond. As for maintenance, keep it clean with a regular car cleaner. Remember, it has a 1 - year warranty against manufacturer defects. And be careful around the exhaust and other chemicals in your car, as they can be harmful. Check www.p65warnings.ca.gov for more info.
