Exedy Stage 2 Cerametalic Clutch Kit Subaru WRX 2002-2005 / Forester XT 2004-2005

Part #: 15950. Our thick cerametallic discs offer excellent heat capacity, making them highly durable, especially for all - wheel - drive applications. Even with a standard thickness, our three - puck cerametallic discs have less inertia than a stock disc. Compared to a stock clutch, there may be a bit of a compromise in startup driveability, like chatter on light throttle and low - rpm startup. This is generally acceptable for modified performance cars. Street drivers should avoid riding the clutch or trying to reduce chatter as it can increase wear significantly. It offers an 87% torque capacity increase. The clamp load is 2310 lb. The spline teeth / major dia is 230 mm, and the disc O.D. is 24T / 25.2 mm. The lightweight flywheel part number is FF01, weighing 14.3 lb, and the standard clutch kit part number is KSB01. Applications include 2002 - 05 Subaru Impreza WRX 2.0L EJ20T Turbo, Pull Type (GC8, GF8, GDA) and 1995 - 01 Subaru Impreza, Legacy 2.2L 6 Turbo, Pull Type.

Using this Exedy clutch kit is straightforward. Just follow the standard installation procedure for your Subaru WRX or Forester XT. When starting your car, be aware that there might be a bit of chatter, especially at low RPMs. This is normal for this type of clutch. Don't try to eliminate the chatter by riding the clutch, as this will cause more wear and tear. For maintenance, regularly check the clutch for any signs of excessive wear. If you notice any strange noises or a decrease in performance, it's a good idea to have it inspected. Also, keep the clutch clean to ensure its longevity. With proper use and maintenance, this clutch kit will serve you well for a long time.