Billetworkz Short Throw Shift Kit Subaru WRX 2015-2025

Fitment Information:

This shift kit fits 2015 - 2024 Subaru WRX models. Note that it may need some adjustments for 2022 - 2024 models.

Features:

The Billetworkz Short Throw Shift Kit cuts shift throw by 55%! Its ergonomic shifter and shift stop work together for smoother, more accurate shifts into second gear, without hitting the e - brake. O - rings are added to prevent rattling. The shifter plate boosts efficiency with better pivot points for shorter throws and a strong brass bushing to reduce play. Upgrade your 2015 - 2023 Subaru WRX with improved shift accuracy and quality.

What's Included:

• (1) Short Throw Shifter (choose your Reverse Lockout Color)
• (1) Shifter Stop (pick your color)
• (1) Shifter Plate
• (1) Shifter Bushing

Short Throw Shifter:

• It offers the shortest shifts among 15 - 23 WRX short shifters on the market. It's also more comfortable and ergonomic. The Reverse Lockout is CNC - machined from 6061 aluminum and anodized for a long - lasting finish. The Shifter Rod is made of 304 Stainless Steel. O - rings in the reverse lockout assembly stop rattling. Lubricate the o - rings with 3 - in - 1 oil. Stainless steel install hardware is included.

Shifter Stop:

• It limits lateral movement, greatly reducing slop in 1st and 2nd gear. When adjusted right, you can engage these gears precisely.

Shifter Transmission Plate:

• Replaces the factory plate and shortens shift throw by changing pivot points. It's slightly heavier to balance the shorter throw.

Shifter Bushing:

• Replaces the factory rubber bushing in the shift cable. Our brass bushing reduces shifter play and ensures positive shifts.

Using the Billetworkz Short Throw Shift Kit is straightforward. First, make sure your car is a 2015 - 2024 Subaru WRX (be aware that 2022 - 2024 models might need some modifications). Start by installing the short throw shifter. You can choose the color of the reverse lockout according to your preference. The shifter rod is made of 304 Stainless Steel, so it's durable. Remember to lubricate the o - rings in the reverse lockout assembly with 3 - in - 1 oil to stop rattling. Next, install the shifter stop. Adjust it so that it limits the lateral movement in 1st and 2nd gear, giving you a more precise shift feel. Then, replace the factory shifter plate with the one included in the kit. This plate shortens the shift throw and is slightly heavier to balance it. Finally, swap the factory rubber bushing in the shift cable with the brass shifter bushing. This will reduce shifter slop. For maintenance, regularly check the o - rings and re - lubricate them as needed. Also, make sure all the parts are tightly installed. If you notice any rattling or slop, double - check the installation and adjustments.