This Noble RD1 Style Carbon Fiber Duck Bill Rear Spoiler is a great fit for 2022 - 2025 Subaru WRX. It features a lightweight and durable design, which is not only easy to install but also built to last. With aerodynamics in mind, it gives your VB WRX an enhanced race - like look, making you stand out from the crowd. The spoiler comes with a gloss carbon fiber finish with clearcoat, ships ready to install, and can be installed on the OEM trunk. 3M double - sided adhesive is included for installation. The bolts are designed for factory STI holes in the trunk, but they're not required for installation. Remember to seal bare metal to prevent rust. Before installation, prep the area, making sure it's free from dust, debris, wax, and not freshly ceramic coated. The 3M needs an installation temperature of 70 - 80 degrees, achieving a solid bond in 24 hours and full bond in 72 hours. Have someone help with a test fit, note the position, apply 3M, and then proceed with the installation carefully.
Using this Noble spoiler on your 2022 - 2025 Subaru WRX is a breeze. First, get the trunk area clean. Make sure there's no dust, debris, wax, or fresh ceramic coating. The 3M adhesive works best at 70 - 80 degrees, so pick a warm day or find a warm place to install it. Have a friend help you test fit the spoiler before you start the real installation. Mark the right position. Then, apply the 3M to the spoiler and pull out a bit of the backing tape. Put the spoiler back in place, check the bolt alignment, and start the bolts but don't tighten them yet. Remove all the 3M backing tape and press down firmly on the spoiler for 30 seconds along each part. Open the trunk, finish tightening the bolts, and put the trunk cover back on. The bolts are there if you want to use them, but they're not necessary. Just remember to seal any bare metal to stop rust from forming. For maintenance, keep it clean. Wash it regularly with a gentle car wash soap and a soft cloth. Avoid using harsh chemicals that could damage the carbon fiber finish.
