Noble STI Mod 1 Carbon Fiber High Back Subaru Duckbill Spoiler WRX 2022-2025

Noble STI Mod 1 Carbon Fiber High Back Spoiler

Fitment: 2022 - 2025 Subaru WRX

Features:

• Revamped OE - style spoiler
• Stunning gloss carbon fiber finish with a clear coat
• Super easy to install right out of the box

Noble initially offered this spoiler in paint - matched options. We've redesigned the mold, and now it's coated in real carbon fiber for a super sleek and sporty look. Just add it to your cart today!

NOTE: 3M is pre - applied for installation.

Installation: First, clean the application area. Make sure it's free from dust, debris, wax, and not freshly ceramic coated. This spoiler can be installed with just 3M. The 3M needs an installation temperature of 70 - 80 degrees. It'll have a solid bond after 24 hours and a full bond after 72 hours. Have someone help you test - fit the spoiler before starting the actual install. Mark the proper position. Apply the 3M to the spoiler and remove the ends of the 3M backing tape. Leave enough exposed so you can pull it out from under the wing later. Then, put the spoiler back in the correct position, remove all the 3M backing tape, and press down firmly.

This is a Noble STI Mod 1 Carbon Fiber High Back Spoiler designed for 2022 - 2025 Subaru WRX. It has a revamped OE - style and a great gloss carbon fiber finish with a clear coat, giving your car a sleek and sporty look. It's very easy to install right out of the box. When installing, clean the area first and make sure it's clean and not freshly ceramic coated. The 3M tape on it requires an installation temperature of 70 - 80 degrees. It'll start to bond in 24 hours and fully bond in 72 hours. Get someone to help you test - fit it before the actual install. Mark the right position, apply the 3M, and carefully remove the backing tape. After putting the spoiler in place, press it down firmly. For maintenance, keep it clean and avoid scratching the carbon fiber surface.