Fitment Information: This spoiler is a perfect fit for 2022 - 2025 Subaru WRX models. Features: The Noble Platinum Series STI - Style Carbon Fiber Duck Bill Rear Spoiler is a masterpiece of design. It's incredibly lightweight yet super durable, and installing it is a breeze. It combines great looks with excellent function. Designed with aerodynamic efficiency, it not only enhances the sporty look of your VB WRX but also makes it stand out from the crowd. Rear location: It's placed at the rear to add that extra sporty touch. Gloss carbon fiber finish with clear coat: The shiny gloss finish protected by a clear coat gives it a sleek and high - end look. Ships ready to install: You'll receive it ready to be installed on your car right away. 3M double - sided adhesive is included: We've included the 3M double - sided adhesive for easy installation. Made from only the best Japanese Carbon Fiber material: We use top - notch Japanese carbon fiber to ensure its quality. Installation: First, clean the application area thoroughly. Make sure it's free from dust, debris, wax, and hasn't been freshly ceramic coated. The 3M adhesive requires an installation temperature between 70 - 80 degrees. After installation, it forms a solid bond in 24 hours and reaches full strength in 72 hours. It's a good idea to have another person help you test - fit the spoiler before starting the actual install. Mark the proper position. Then, apply the 3M to the spoiler and remove the ends of the 3M backing tape, leaving enough to pull out later. Reposition the spoiler in the correct spot and remove all of the 3M backing tape. Press it down firmly. What makes this product “Platinum”: Not all carbon fiber is the same. Our Noble “Platinum” carbon fiber products are of higher quality with a more consistent weave. Up close, you'll notice fewer visual imperfections. And with stronger, reinforced mounting points, it clearly outshines other carbon fiber parts.
Using this spoiler is a great way to upgrade your Subaru WRX's look and performance. When you receive the spoiler, it's already ready for installation. First, find a clean and dry place to work, and make sure the temperature is between 70 - 80 degrees. Clean the area on your car where you'll install the spoiler really well. Remove any dust, dirt, wax, or if it's freshly ceramic coated, wait a while. Have a friend help you test - fit the spoiler on your car to see where it should go. Mark the right position. Then, apply the 3M double - sided adhesive that comes with the spoiler. Pull out a bit of the backing tape from the ends. Put the spoiler back in the marked position and carefully pull out all of the backing tape. Press the spoiler down hard so it sticks well. After installation, give it 24 hours for a solid bond and 72 hours for a full bond. For maintenance, you can wash it with a mild car wash soap and a soft cloth. Avoid using abrasive materials that could scratch the gloss carbon fiber finish. If you notice any issues with the adhesive over time, you might need to replace it. Keep it away from extreme heat or cold to maintain its quality.
