This is the Noble STI Style High - Back Duckbill Carbon Fiber Spoiler (Type 1) designed specifically for 2022 - 2025 Subaru WRX. It's a perfect match for your car, offering an OE - style fit that looks as if it came straight from the factory. With a beautiful gloss carbon fiber finish, it gives your vehicle a sleek and sporty appearance right away. The spoiler is made using a vacuum - formed construction (Type 1), which ensures a thinner product with 100% carbon fiber coverage. This method also fuses the carbon and resin extremely well. It's easy to install and comes ready to go right out of the box. Noble initially offered this spoiler in paint - matched options, but now we've re - engineered the mold to coat it in real carbon fiber. Type 1 spoilers use vacuum - formed carbon, resulting in a high - quality, though more expensive and time - consuming to produce, product. In contrast, Type 2 spoilers use overlaid carbon on a fiberglass/FRP shell, are a bit cheaper, and can be made faster. Note that 3M is pre - applied for installation. Before installation, clean the application area thoroughly, removing dust, debris, wax, and avoid installing on freshly ceramic - coated surfaces. The 3M requires an installation temperature between 70 - 80 degrees. It forms a solid bond after 24 hours and reaches full strength after 72 hours. It's a good idea to have someone help you test - fit the spoiler before starting the actual install. Mark the proper position, then apply the 3M to the spoiler and remove the ends of the backing tape. Put the spoiler back on, pull out the backing tape, reposition it correctly, and press down firmly.
Using this Noble STI Style Carbon Fiber High - Back Duckbill Spoiler is a breeze. First, pick a spot where the temperature is between 70 - 80 degrees Fahrenheit to install it. Clean the area on your 2022 - 2025 Subaru WRX where you'll put the spoiler. Make sure it's free from dust, debris, wax, and not freshly ceramic - coated. Get a friend to help you test - fit the spoiler and mark the right position. Then, apply the pre - applied 3M to the spoiler. Remove the ends of the 3M backing tape so you can pull it out later. Place the spoiler back on the marked spot, pull out the rest of the backing tape, and press down hard. Remember, it takes 24 hours for a solid bond and 72 hours for a full bond. As for maintenance, just wash it regularly with a mild car cleaner and a soft cloth. Avoid using abrasive materials that could scratch the carbon fiber finish. This will keep your spoiler looking great for a long time.
