Injector Dynamics 2600-XDS Injectors 48mm Length 11mm Top WRX Bottom Adapter (Set of 4) WRX 2002-2014 / STI 2007-2021

The ID2600-XDS is designed specifically for liquid fuels. It has corrosion-resistant internals and offers long - term compatibility with ethanol and methanol. Part #: 2600.48.11.WRX.4. With the highest flow rate among Bosch injectors, it flows 50% more than the ID1700x. The Dual Slope Matching technology ensures better cylinder - to - cylinder consistency, especially at low pulse widths. It matches the flow rate in both linear and non - linear operating ranges, providing even fueling across the whole operating range. Injector Dynamics introduced Slope Intercept Matching over a decade ago, but Dual Slope Matching takes it further into the non - linear range. Nominal Flow Rate: 2600cc/min @ 3.0 Bar (43.5 psi). Maximum Differential Fuel Pressure: 9.0 Bar (130.5 psi), requires a minimum of 11 volts. It's compatible with methanol, ethanol, and all known hydrocarbons, but not with ethers or nitro methane. The electrical connector is USCAR.

Using the ID2600 - XDS injectors is straightforward. First, make sure your vehicle is a WRX from 2002 - 2014 or an STI from 2007 - 2021. When installing, connect the USCAR electrical connector properly. Only use fuels that the injectors are compatible with, like methanol, ethanol, and all known hydrocarbons. Avoid using ethers or nitro methane as they can damage the injectors. For fuel pressure, don't exceed 9.0 Bar (130.5 psi) and always ensure a minimum of 11 volts. As for maintenance, check the injectors regularly for any signs of corrosion, especially if you're using ethanol or methanol. If you notice any performance issues with your engine, it might be time to have the injectors inspected.