This Perrin front sway bar is a great upgrade for your Subaru. It fits 2011 - 2014 Subaru WRX, 2008 - 2014 Subaru STI, and 2009 - 2013 Subaru Forester XT. With a 25mm (1 inch) size, it significantly reduces body roll and improves handling. The bar is powder - coated red to resist corrosion. You have two adjustment holes: Hole #1 is 220% stiffer than the 20mm OEM bar, and Hole #2 is 260% stiffer. It requires an intermediate level of installation effort and about 1 hour to install. Inside the box, you'll find a PERRIN front sway bar, two bushings, an Energy Suspension polyurethane grease packet, a PERRIN front license plate, and warranty, instructions, and stickers. Made from mandrel - bent 4130 steel and powder - coated, it offers long - lasting performance. The included polyurethane pocketed bushings reduce the need for re - greasing, and all necessary hardware makes for a clean and relatively simple installation.
Using your Perrin front sway bar is easy. First, make sure your Subaru (either a 2011 - 2014 WRX, 2008 - 2014 STI, or 2009 - 2013 Forester XT) is parked on a flat and stable surface. Refer to the installation guide that comes with the kit and take about an hour to install it. You'll need to use the included hardware and bushings. There are two adjustment holes, so choose the one that suits your driving needs - Hole #1 for a 220% stiffer ride compared to the OEM bar, or Hole #2 for a 260% stiffer feel. When it comes to maintenance, check the powder - coated red finish regularly for any signs of chipping or damage. If you notice any, touch it up to prevent corrosion. The polyurethane bushings don't need re - greasing often, but you can use the included grease packet if necessary. Always follow the safety instructions in the warranty and instruction materials to ensure a safe and enjoyable driving experience.
