Fitment Information: This rear spoiler is a perfect fit for 2022 - 2025 Subaru WRX models. Features: The Noble RD2 Style Carbon Fiber Duck Bill Rear Spoiler is a game - changer. It has a lightweight yet super - durable design that's a breeze to install and built to last for ages. It's a great blend of form and function. With aerodynamics in mind, it gives your VB WRX a cool race - like appearance. Stand out on the road and flaunt that sporty look with this must - have rear spoiler from Noble. It comes with a gloss carbon fiber finish protected by a clear coat. It's shipped ready to install right out of the box. It can be easily installed on the OEM trunk. And for the installation, 3M double - sided adhesive is included. Installation: The bolts provided can be used with the factory STI holes in the trunk. If you have an OEM spoiler, you'll need to slightly widen the holes for proper bolt insertion. But these bolts aren't necessary for installation. Remember to seal bare metal with sealant to prevent rust. Prepare the application area. Make sure it's clean, free from dust, debris, wax, and hasn't been freshly ceramic coated. You can install this spoiler just with 3M. The 3M requires an installation temperature between 70 - 80 degrees. It forms a solid bond after 24 hours and reaches full strength after 72 hours. Get someone to help you test - fit the spoiler before starting the actual install. Note the right position. Apply 3M to the spoiler and remove the ends of the 3M backing tape. Leave enough exposed so you can pull it out from under the wing later. Reposition the spoiler correctly, double - check bolt alignment, and start the bolts but don't tighten them yet. Then remove all of the 3M backing tape. Press down firmly on the spoiler for 30 seconds along each section. Open the trunk, finish tightening the bolts, and reassemble the trunk cover. California Prop 65 Warning: Operating, servicing, and maintaining a passenger vehicle or off - highway motor vehicle can expose you to harmful chemicals like engine exhaust, carbon monoxide, phthalates, and lead, which are known in California to cause cancer and birth defects or other reproductive harm. To reduce exposure, avoid breathing exhaust, don't idle the engine unless needed, service your vehicle in a well - ventilated area, and wear gloves or wash your hands often when working on your vehicle. For more information, visit www.p65warnings.ca.gov.
Hey there! If you've got a 2022 - 2025 Subaru WRX and you've just got this awesome Noble RD2 Style Carbon Fiber Duck Bill Rear Spoiler, here's how to use it. First, check the fitment. It's made specifically for your car model, so it should fit like a glove. For installation, you can choose to use the bolts or just rely on the included 3M double - sided adhesive. If you use the bolts, be aware that if you have an OEM spoiler, you'll need to widen the holes a bit. And don't forget to seal the bare metal to stop rust. Before applying the 3M, make sure the area is clean and free from dust, wax, etc. The 3M works best at 70 - 80 degrees. It takes 24 hours for a solid bond and 72 hours for a full bond. Have someone help you test - fit the spoiler first to get the right position. When applying the 3M, leave some of the backing tape exposed so you can remove it easily later. After positioning the spoiler, press down firmly for 30 seconds on each part. Then finish tightening the bolts and put the trunk cover back on. As for maintenance, keep it clean. Wash it regularly with a mild car cleaner. Avoid using harsh chemicals that could damage the gloss carbon fiber finish. And when servicing your car, follow the California Prop 65 guidelines to stay safe from harmful chemicals.
