Fitment: 2022 - 2025 Subaru WRX. The Noble RD3 Style Duck Bill Rear Spoiler is painted to match your car. It's lightweight, tough, and super easy to install. With great aerodynamics, it gives your VB WRX a cool racing look. It comes with a premium paint - matched finish, is ready to install right out of the box, and can be attached to the OEM trunk. 3M double - sided adhesive is included for installation. This spoiler stands out from the rest and gives your car a sporty style. Before installation, clean the application area, removing dust, debris, wax, and avoid freshly ceramic - coated surfaces. The 3M needs an installation temperature of 70 - 80 degrees. It forms a solid bond in 24 hours and a full bond in 72 hours. Have someone help you test - fit the spoiler first, note the right position. Apply 3M to the spoiler, expose enough backing tape so you can pull it out later. Put the spoiler in place, double - check bolt alignment, start the bolts but don't tighten. Remove all 3M backing tape, press firmly for 30 seconds along each section. Open the trunk, finish tightening the bolts, and reassemble the trunk cover.
Using the Noble RD3 Style Duckbill Rear Spoiler is easy. First, make sure your car is a 2022 - 2025 Subaru WRX. When you're ready to install, clean the area where you'll put the spoiler well. Get rid of dust, debris, and wax. Also, don't install it on a freshly ceramic - coated surface. The 3M adhesive needs a temperature between 70 and 80 degrees. Have a friend help you test - fit the spoiler before you start the real installation. Once you know the right position, apply the 3M to the spoiler. Expose enough of the backing tape so you can pull it out later. Put the spoiler in place, check the bolts, and start them but don't tighten yet. Then remove all the backing tape and press hard on the spoiler for 30 seconds in each section. Open the trunk, finish tightening the bolts, and put the trunk cover back on. After installation, wait 24 hours for a solid bond and 72 hours for a full bond. To maintain it, just wash it regularly with car - friendly soap and water. Avoid using harsh chemicals that could damage the paint finish.
