Noble STI Style High Back Rear Spoiler with Paint Matching
Fitment: 2022 - 2025 Subaru WRX
Features:
- Perfectly matches the OE style
- Factory - painted to match your car
- Easy and quick to install
Noble offers this great OE - style spoiler in a variety of paint - matched colors. No need to find a paint shop. Just order from us, and it'll be ready to install right away. While the factory only had one color option, we have all colors for a unique look.
Note: Pre - inserted nuts are for painting only. Factory spoiler bolts won't work.
Installation: Clean the application area, making sure it's free of dust, debris, wax, and not freshly ceramic - coated (unless using mechanical fasteners). You can install this spoiler with 3M adhesive and/or mechanical fasteners. The 3M adhesive needs an installation temperature of 70 - 80 degrees. It forms a solid bond in 24 hours and a full bond in 72 hours. Have someone help you test - fit the spoiler before actual installation. Mark the correct position. Apply 3M to the spoiler, remove the ends of the 3M backing tape, and expose enough to pull it out later. Apply the promoter before final installation. Reposition the spoiler correctly, remove all the 3M backing tape, and press down firmly. Remember, screws are an addition to 3M. If using screws, tighten them by hand as you're drilling through plastic. You can buy #8 self - tapping screws locally.
This Noble STI - style high - back rear spoiler is for 2022 - 2025 Subaru WRX. It comes in various paint - matched colors. Before installation, clean the area where you'll put the spoiler. Make sure it's free from dust, debris, wax, and not freshly ceramic - coated (unless you're using mechanical fasteners). You can use 3M adhesive and/or mechanical fasteners to install it. The 3M adhesive works best at 70 - 80 degrees. It takes 24 hours for a solid bond and 72 hours for a full bond. Have a friend help you test - fit the spoiler first to find the right position. Apply 3M adhesive to the spoiler and remove the ends of the backing tape. Apply the promoter before putting the spoiler in place. After that, remove all the backing tape and press down hard. If you use screws, tighten them by hand as you're drilling through plastic. You can buy #8 self - tapping screws at a local store. Also, note that the pre - inserted nuts are just for painting, and the factory spoiler bolts won't work.
