Part #: STF - 15wrx - 3dcf - mirror - lower. If you're eager to make your WRX stand out from the stock ones, this is an affordable and stylish solution. These fender vent overlays are a breeze to install. The 3D carbon fiber vinyl we use has a great texture, far better than a simple painted design. They're installed over the painted fender vent area below the WRX or STI logo, making the fender vent more prominent. For vehicles with lighter paint colors, you might want to choose the V2 fender vent overlays. They wrap around the fender panel for more coverage, and using a bit of heat to wrap them around the edge is easy. Note: These are sold as a pair, and only one set is needed per vehicle.
Using these fender vent overlays is a piece of cake. First, find the painted fender vent area below the WRX or STI logo. Then, carefully place the overlay on it and press it down firmly. It should stick right on. If you have a vehicle with lighter paint and you've chosen the V2 overlays, you'll need to use a heat source, like a hair dryer, to help it wrap around the edge. Just heat it gently and it'll bend easily. As for maintenance, a simple wipe with a clean, damp cloth is enough to keep them looking great. Don't use any harsh chemicals or abrasive materials, as they could damage the 3D carbon fiber vinyl. And remember, these come as a pair, so you only need one set for your vehicle.
