The XR FA20 Blue turbocharger is designed for the 2015+ Subaru WRX. It comes with a 73mm HTZ compressor wheel, a stock - fitting, stock - looking cover, and a 10cm2 turbine section. This bolt - on turbocharger strikes a great balance between quick spooling and high power output. It features the Xona Rotor Ball Bearing billet CHRA for enhanced durability. The turbo can flow 57 pounds per minute and can produce up to 475WHP. It comes with an oil line and gasket set, so you can directly install it on your car. The factory oil drain sump is reused, but it's not included. Key features of the Subaru XR FA20 Blue are a 73HTZ compressor wheel, a 57LB per minute flow rate, specific CW and TW measurements, a factory - sized stock - appearing compressor housing, a 10CM FA20 fitment turbine housing, Xona Rotor Ball Bearing CHRA, 15PSI actuator pressure, and an included oil line. Note that this turbo is designed only for the 2015+ WRX platform and won't fit other FA20 - motor platforms or vehicles with EJ - series motors. Porting is available and recommended to fully unlock its performance. All Forced Performance turbochargers are custom - built to your specifications, and build times vary by model and options, so a delivery date can't be guaranteed.
Using this turbocharger is straightforward. First, make sure your car is a 2015+ Subaru WRX as it won't fit other models. Install the turbocharger using the included oil line and gasket set. You can reuse the factory oil drain sump. When it comes to maintenance, regularly check the oil level and quality. Keep an eye on the turbo's performance and listen for any unusual noises. If you want to get the most out of this turbo, consider our porting service. Remember, all Forced Performance turbochargers are made to order, so be patient during the building process as we can't give a definite delivery date.
