Sticker Fab Headlight Reflector Overlays Subaru WRX / STI 2015-2017

A customer asked for a way to darken the front orange reflectors. Sticker Fab used the same tint as the tail lights to meet this need. These overlays are super durable. After squeegeeing out the water and air, they'll stick to your car for a long - time. You don't have to worry about auto car washes or power washing. You can choose between LIGHT or DARK smoke tint. The first two pictures compare the stock look with the tinted one, and the others show how it looks from a distance, using static cling material. Installation is easy: Clean the headlight surface. Place the material in the top corner near the doors and work towards the front. Soapy water helps with alignment. If it's not right, you can remove and re - place it (only for wet installation). Once perfectly aligned, squeegee out the water and air. Let the vehicle sit in the sun for a while and avoid power washing for at least 48 hours.

Using these headlight reflector overlays is a breeze. First, clean the headlight surface. Then, start placing the material in the top corner closest to the doors and work your way to the front. Add some soapy water to make alignment easier. If you mess up the alignment, you can take it off and put it back on, but this only works if you're doing a wet installation. After getting it perfectly in place, use a squeegee to get rid of the water and air under the material. For best results, let your car sit in the sun for a bit. Just remember, don't power wash your car for at least 48 hours after installation. Once installed, these overlays are very durable and can handle auto car washes without any issues.