You'll receive 2 pairs of these amazing grille pinstripes. So, you can complete your installation perfectly and still have a spare set for later! Apply them right the first time and share the second pair with a friend. Installation is a breeze. First, clean the grille surface. You can choose between a wet or dry installation. For a wet install, wet the back of the vinyl, and you can even add a bit of soap. This lets you adjust the vinyl easily but makes it stick less until it dries completely. A dry install is also an option. The stripe tapers at the edges, and the part just before the taper is for the corners. Start at one corner and slowly apply the stripe across the grille until you reach the other corner.
Using these grille pinstripes is super easy. First, make sure to clean the grille surface thoroughly. You have two ways to install them - wet or dry. For the wet method, wet the back of the vinyl with a bit of soapy water. This will let you move the vinyl around to get it in the right position, but you'll have to wait for it to dry completely for a proper stick. For a dry install, you can just go ahead and apply it. Remember, the stripe tapers at the edges, and the area before the taper should be placed in the corners. Start from one corner and work your way across to the other. As for maintenance, just clean the pinstripes gently with a soft cloth and mild soap when they get dirty. Avoid using harsh chemicals or abrasive materials as they might damage the vinyl. Keep them dry and protected from extreme weather conditions for a longer lifespan.
