2022 - 2024 WRX Headlight and Front Sidemarker Overlays
Sidemarker overlays and eyebrows are trendy aesthetic upgrades for your vehicle. They tone down the bright orange in the headlights and wrap around the top of the headlight, giving it a fresh new look.
Design Choices:
- V1 - Partial Coverage (Covers only the side)
- V2 - Covers Both Side and Top
- V3 - Partial Coverage (Covers only the side; smaller than V1, ideal for Limited headlights but also looks great on regular ones)
NOTE: The appearance may vary on Limited models due to their internal design.
Available Colors:
- Dark Smoke - High - quality standard dark smoke material made in Germany.
- Light Smoke - Standard light smoke material crafted in Germany.
- Black - Supercast film that allows only a little light through when backlit.
INSTRUCTIONS
Work in an environment with a temperature between 70 - 85 degrees. Clean the application area and its surroundings before installation. We suggest these items for installation:
- Microfiber cloth
- Detailing Spray or glass cleaner
- Soapy Water (StickerFab Application Fluid is recommended)
- Soft - edged Squeegee
- Heat Gun or Hair Dryer
Ensure there's no wax on the lens. You can moisten the back of the vinyl with a bit of dish - soap water to slide it into the right position. Then, use your fingers to push out the soapy water and let it dry. You can use low heat to speed up the drying process.
These Sticker Fab headlight and front sidemarker overlays are a great way to upgrade the look of your 2022 - 2024 Subaru WRX. First, make sure your work area is between 70 - 85 degrees. Clean the headlight and the area around it using a microfiber cloth and either detailing spray or glass cleaner. Before you start, check that there's no wax on the lens. You can wet the back of the vinyl with a little dish - soap water. This will let you move the vinyl around until it's in the perfect spot. Once it's in place, use your fingers to push out the soapy water. Let it dry on its own, or you can use a hair dryer or heat gun on low heat to dry it faster. Remember, on Limited models, the overlays might look a bit different because of the internal design. There are three design options - V1 covers only the side, V2 covers the side and top, and V3 is a smaller side - only cover, great for Limited headlights. You also have three color choices: dark smoke, light smoke, and black. These overlays are made with high - quality materials, with the dark and light smoke ones being made in Germany. Keep your overlays clean by gently wiping them with a microfiber cloth and a mild cleaner. Avoid using harsh chemicals that could damage the material.
